Zhengchang420d Pellet Mill Die/ Machinery Parts ring Mould For Rumination Feed (Cattle and Sheep)

The aperture range of the pellet mill die used for rumination feed (cattle and sheep) is between 3.0-7.0mm, and the length-aperture ratio also called compression ratio is between 1:6-1:12. Because the crude fiber content in the rumination feed formula is high, the compression ratio should not be set too high, otherwise the pelleting will be relatively difficult and the service life of the ring die will also be shorter. Our company can carry out special compound hardening process for ring die according to customer's requirements, so that the service life of ring die is increased by more than 50% on the original basis.
The hole size,effective pelleting hole length ,and the compression ratio of the ring die are closely related to the quality and efficiency of the pelleting. If the hole size of the ring die is too small and the thickness is too thick, the production efficiency will be low and the cost will be high. On the contrary, the particle will be loose, which affects the quality and pelleting effect, also affects the service life of the ring die. Therefore, scientifically choosing ring die parameters such as hole size and thickness is the premise of efficient and high-quality production. Happy Mould processing all be CNC automatic control, die hole is formed in one time, high finish, no material dumping, uniform particles, reduce feed pellet waste.